Skip to main content
logo

Request Quote

Contact

Chemical Compatibility

Aroclor 1260 Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Aroclor 1260, with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker
MaterialCodeTrade NamesRating
Nitrile (Buna-N)NBRBuna-N, HycarA
Hydrogenated NitrileHNBRTherban, ZetpolA
Fluorocarbon (Viton)FKMViton, FluorelA
PerfluoroelastomerFFKMKalrez, ChemrazA
Ethylene PropyleneEPDMNordel, VistalonB
SiliconeVMQSilastic, ElastosilA
FluorosiliconeFVMQFluorosilicone LS, Silastic FSRA
Neoprene (Chloroprene)CRNeoprene, BayprenA
Natural RubberNRNR, Isoprene (IR)A
Styrene ButadieneSBRBuna-S, GR-SA
ButylIIRButyl, Exxon ButylA
PolyurethaneAUAdiprene, VibrathaneD
Aflas (TFE/P)FEPMAflas, FEPMA
ABCDX

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Aroclor 1260

The table above rates every common O-ring elastomer for service in Aroclor 1260 on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Aroclor 1260, the strongest candidates are Nitrile (Buna-N), Hydrogenated Nitrile, Fluorocarbon (Viton), Perfluoroelastomer, Ethylene Propylene, Silicone, Fluorosilicone, Neoprene (Chloroprene), Natural Rubber, Styrene Butadiene, Butyl, Aflas (TFE/P). These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.