Skip to main content
logo

Request Quote

Contact

Chemical Compatibility

Dow Corning 1265 Fluorosilicone Fluid Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Dow Corning 1265 Fluorosilicone Fluid, with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker
MaterialCodeTrade NamesRating
Nitrile (Buna-N)NBRBuna-N, HycarB
Hydrogenated NitrileHNBRTherban, ZetpolB
Fluorocarbon (Viton)FKMViton, FluorelA
PerfluoroelastomerFFKMKalrez, ChemrazA
Ethylene PropyleneEPDMNordel, VistalonA
SiliconeVMQSilastic, ElastosilA
FluorosiliconeFVMQFluorosilicone LS, Silastic FSRC
Neoprene (Chloroprene)CRNeoprene, BayprenA
Natural RubberNRNR, Isoprene (IR)A
Styrene ButadieneSBRBuna-S, GR-SA
ButylIIRButyl, Exxon ButylA
PolyurethaneAUAdiprene, VibrathaneA
Aflas (TFE/P)FEPMAflas, FEPMA
ABCDX

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Dow Corning 1265 Fluorosilicone Fluid

The table above rates every common O-ring elastomer for service in Dow Corning 1265 Fluorosilicone Fluid on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Dow Corning 1265 Fluorosilicone Fluid, the strongest candidates are Nitrile (Buna-N), Hydrogenated Nitrile, Fluorocarbon (Viton), Perfluoroelastomer, Ethylene Propylene, Silicone, Neoprene (Chloroprene), Natural Rubber, Styrene Butadiene, Butyl, Polyurethane, Aflas (TFE/P). These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.