Which O-ring material is best for Fc 123 (dichlorotrifluoroethane)?

Materials rated Excellent or Good for Fc 123 (dichlorotrifluoroethane) include Perfluoroelastomer. Confirm the final choice against your operating temperature and concentration.

Are these Fc 123 (dichlorotrifluoroethane) compatibility ratings guaranteed?

No. Ratings are guideline values at ambient temperature (~20°C) and are not a warranty. Compatibility with Fc 123 (dichlorotrifluoroethane) varies with temperature, concentration, pressure and exposure time — always validate for your application.

Contact

Chemical Compatibility

Fc 123 (dichlorotrifluoroethane) Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Fc 123 (dichlorotrifluoroethane), with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker

Material	Code	Trade Names	Rating
Nitrile (Buna-N)	NBR	Buna-N, Hycar	XInsufficient Data
Hydrogenated Nitrile	HNBR	Therban, Zetpol	XInsufficient Data
Fluorocarbon (Viton)	FKM	Viton, Fluorel	XInsufficient Data
Perfluoroelastomer	FFKM	Kalrez, Chemraz	AExcellent
Ethylene Propylene	EPDM	Nordel, Vistalon	XInsufficient Data
Silicone	VMQ	Silastic, Elastosil	XInsufficient Data
Fluorosilicone	FVMQ	Fluorosilicone LS, Silastic FSR	XInsufficient Data
Neoprene (Chloroprene)	CR	Neoprene, Baypren	XInsufficient Data
Natural Rubber	NR	NR, Isoprene (IR)	XInsufficient Data
Styrene Butadiene	SBR	Buna-S, GR-S	XInsufficient Data
Butyl	IIR	Butyl, Exxon Butyl	XInsufficient Data
Polyurethane	AU	Adiprene, Vibrathane	XInsufficient Data
Aflas (TFE/P)	FEPM	Aflas, FEPM	XInsufficient Data

AExcellentBGoodCFairDNot RecommendedXInsufficient Data

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Fc 123 (dichlorotrifluoroethane)

The table above rates every common O-ring elastomer for service in Fc 123 (dichlorotrifluoroethane) on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Fc 123 (dichlorotrifluoroethane), the strongest candidates are Perfluoroelastomer. These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.

Fc 123 (dichlorotrifluoroethane) Compatibility with O-Ring Materials

Choosing a seal material for Fc 123 (dichlorotrifluoroethane)

Related tools

Explore Harkesh