Skip to main content
logo

Request Quote

Contact

Chemical Compatibility

Fc 22 (chlorodifluoromethane) Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Fc 22 (chlorodifluoromethane), with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker
MaterialCodeTrade NamesRating
Nitrile (Buna-N)NBRBuna-N, HycarD
Hydrogenated NitrileHNBRTherban, ZetpolD
Fluorocarbon (Viton)FKMViton, FluorelD
PerfluoroelastomerFFKMKalrez, ChemrazA
Ethylene PropyleneEPDMNordel, VistalonB
SiliconeVMQSilastic, ElastosilD
FluorosiliconeFVMQFluorosilicone LS, Silastic FSRC
Neoprene (Chloroprene)CRNeoprene, BayprenA
Natural RubberNRNR, Isoprene (IR)A
Styrene ButadieneSBRBuna-S, GR-SA
ButylIIRButyl, Exxon ButylA
PolyurethaneAUAdiprene, VibrathaneB
Aflas (TFE/P)FEPMAflas, FEPMX
ABCDX

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Fc 22 (chlorodifluoromethane)

The table above rates every common O-ring elastomer for service in Fc 22 (chlorodifluoromethane) on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Fc 22 (chlorodifluoromethane), the strongest candidates are Perfluoroelastomer, Ethylene Propylene, Neoprene (Chloroprene), Natural Rubber, Styrene Butadiene, Butyl, Polyurethane. These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.