Skip to main content
logo

Request Quote

Contact

Chemical Compatibility

Potassium Dichromate Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Potassium Dichromate, with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker
MaterialCodeTrade NamesRating
Nitrile (Buna-N)NBRBuna-N, HycarA
Hydrogenated NitrileHNBRTherban, ZetpolA
Fluorocarbon (Viton)FKMViton, FluorelA
PerfluoroelastomerFFKMKalrez, ChemrazA
Ethylene PropyleneEPDMNordel, VistalonA
SiliconeVMQSilastic, ElastosilA
FluorosiliconeFVMQFluorosilicone LS, Silastic FSRA
Neoprene (Chloroprene)CRNeoprene, BayprenA
Natural RubberNRNR, Isoprene (IR)D
Styrene ButadieneSBRBuna-S, GR-SB
ButylIIRButyl, Exxon ButylA
PolyurethaneAUAdiprene, VibrathaneB
Aflas (TFE/P)FEPMAflas, FEPMA
ABCDX

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Potassium Dichromate

The table above rates every common O-ring elastomer for service in Potassium Dichromate on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Potassium Dichromate, the strongest candidates are Nitrile (Buna-N), Hydrogenated Nitrile, Fluorocarbon (Viton), Perfluoroelastomer, Ethylene Propylene, Silicone, Fluorosilicone, Neoprene (Chloroprene), Styrene Butadiene, Butyl, Polyurethane, Aflas (TFE/P). These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.