Skip to main content
logo

Request Quote

Contact

Chemical Compatibility

Propanoic Acid Nitrile Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Propanoic Acid Nitrile, with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker
MaterialCodeTrade NamesRating
Nitrile (Buna-N)NBRBuna-N, HycarD
Hydrogenated NitrileHNBRTherban, ZetpolD
Fluorocarbon (Viton)FKMViton, FluorelC
PerfluoroelastomerFFKMKalrez, ChemrazA
Ethylene PropyleneEPDMNordel, VistalonD
SiliconeVMQSilastic, ElastosilD
FluorosiliconeFVMQFluorosilicone LS, Silastic FSRD
Neoprene (Chloroprene)CRNeoprene, BayprenD
Natural RubberNRNR, Isoprene (IR)C
Styrene ButadieneSBRBuna-S, GR-SC
ButylIIRButyl, Exxon ButylD
PolyurethaneAUAdiprene, VibrathaneD
Aflas (TFE/P)FEPMAflas, FEPMB
ABCDX

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Propanoic Acid Nitrile

The table above rates every common O-ring elastomer for service in Propanoic Acid Nitrile on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Propanoic Acid Nitrile, the strongest candidates are Perfluoroelastomer, Aflas (TFE/P). These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.